All About Daily Newark News

How to Clean a Bathtub?

Nov 27

How Do You Clean a Bathtub?

The bathtub is the ideal spot to relax. Clean tubs can enhance your enjoyment by keeping any dirt or soap scum off yours. It isn't easy to locate the best place to clean your tub contaminated with mold and mildew. This blog will teach you how to clean your tub without harsh chemicals thoroughly!

What's the Significance of Washing Your Bathtub?

Cleaning is the second best quality to godliness. Cleaning your tub can stop the growth of mildew and mold. The inhalation of these spores could cause respiratory issues. Mildew and mold can create spores, which can cause asthma-related symptoms. It could also impact your children's health and well-being, so clean any play places.

Mineral deposits and soap scum can cause a stained bathtub. It is possible to clean your tub by adding cleaner before taking a shower or bath.

What is the recommended frequency at which your tub be cleaned?

For busy people, It is recommended to perform this every week. If this isn't feasible for you, then try to take it daily. We often forget to wash our homes after the dirt has accumulated. Don't allow this to happen to your bathtub!

What can you do to prevent further buildup?

There are various ways to ensure that the stain doesn't come back after you've removed them.

It can prevent soap scum from forming again by using less shower gel or shampoo while bathing. This allows water to wash them away before drying them on bathtub surfaces. It is also essential to eliminate any moisture accumulated after each usage since this can create an environment that encourages mold and mildew to grow.

Every couple of months, you should apply a layer of car or furniture polish wax to the surface of your bathtub. This will shield your tub from any dirt and grime that could try to build up shortly.

To remove water from surfaces after showers, use a squeegee to remove it before it gets absorbed and causes harm.

These suggestions will allow you to maintain your bath cleaner for longer without using harmful chemical products or elbow grease. If you notice a build-up, do not be afraid to try another one. In the end, you'll discover the one that is best for you and will be a part of your routine cleaning.

How to clean a bathtub?

There are many methods to wash your tub. Here are a few of the most effective that have proven successful for many people:

Remove the dirt and grime, loosen the grime and dirt, and pour boiling water over the tub's surface. Allow it to rest for a few minutes. It is possible to clean the tub using brushes or your hands. Rinse the tub using cold water.

Make a paste from baking soda and vinegar. Apply the paste on the areas that are stained and let it for 15 minutes before taking care to clean. Then, wash with warm water.

Spray the bottle with a bleach solution and apply it to the areas that require more focus. Let it sit for 5 minutes before you wash it off using warm water. Be aware that bleach may cause harm to certain surfaces. Be sure to test the bleach on an area of a smaller size before you test it.

Make a paste from baking soda, dish soap, and water. It can be used to remove any stains from your bath or shower. This technique doesn't require particular equipment. To avoid any accumulation, wash the area thoroughly with warm water and then dry it.

It is possible to hire an expert if you've got numerous stains you do not want to wash off. They'll know which products will work best to eliminate discoloration and buildup. If you need more help, consider upgrading your tub's finish.

How to clean a bathtub

Dish Soap and Bleach:

It is as simple as mixing 1 cup each in the water and then placing it in the tub to soak. Then, scrub the stain with brushes or sponges. Allow the mixture to remain for at least two hours before washing it off using warm water. Repeat the process until the remaining stain is removed. If you let the solution sit for a while, it could take away the rusty particles from the grout. But, excessive exposure to the mixture can cause corrosion of steel fixtures within as little as 8 hours, so keep an eye on it. After soaking, wash the drains using equal amounts of baking soda, vinegar (2 cups), and boiling water (1 cup).

Baking Soda and Vinegar:

Baking soda and vinegar can be a different methods to wash a bathtub. It is possible to wash the tub with half a cup of each. Then scrub it using brushes or sponges. Then allow it to rest for at least 10 minutes. Next, flush out the drains using equal quantities of vinegar, baking soda (2 cups) and boiling water (1 cup) and then rinse with cold water. Repeat the process until the staining is gone. But, too much exposure to water can cause rust on steel fixtures in as short as eight hours. One tablespoon of white distillation vinegar is an excellent addition to every gallon of rinse water to avoid corrosion caused by salts in hard water.

Utilizing Commercial Products:

It is also possible to use commercial products to clean your bathtub. Follow the directions of the manufacturer and wash with warm water. Repeat this process until the stain is gone. Before using the product, follow all instructions and warnings after using baking soda, vinegar (2 cups), and boiling water (1 cup) and flush any debris accumulated in the drains.

Cleaning Tips

Before applying any cleaning product to the entire surface, test it on the smallest area.

Combining bleach and household chemicals, such as ammonia agents, could produce dangerous gas.

Before using any commercially available product, be sure you have read all the instructions and warnings.

1 tablespoon of white distillation vinegar is recommended to be added to every gallon of rinse water to avoid corrosion caused by salts in hard water.

After cleaning the tub, wash out any debris using equal amounts of baking soda, vinegar (2 cups), and boiling water (1 cup).

Steps on Cleaning your Bathtub

To wash your bathtub, remove large chunks of dirt and other debris. This can be accomplished with brushes or a vacuum cleaner with an attachment for a hose. You can use detergent to get rid of soap mildew, scum, or other residues. Wear gloves and goggles when using detergents since they could irritate the skin and eye damage.

Once you've removed the large pieces, you can clean the tub using an absorbent towel and hot water. To ensure no grime or dirt remains, ensure you reach every corner. It is possible to apply a more potent cleanser if you've got stubborn mildew or soap scum. Avoid harsh chemicals since they could cause harm to the bathtub's surface.

After you have cleaned the tub, wash it off with hot water. Dry it using an absorbent towel. Consider applying an oil polish or sealant to shield your tub from grime and dirt buildup. Now you can enjoy a sparkling, clean tub without worrying about harmful chemicals.

If you don't have time to clean your home, NW Maids is here to help you. Our experienced professionals will work diligently to clean your bathroom. Plus, we offer a 100% satisfaction guarantee so that you can be sure you will love the results! Call us now and schedule a cleaning session. 


Contact NW Maids to learn more:


Contact the NW Maids Seattle location:

NW Maids Cleaning Service

10002 Aurora ave N Suite 36-192

Seattle, WA 98133

(206) 508-5850